Panasonic DP-135FP User Manual

Page of 114
MAINTENANCE
91
MA
INTE
NA
NCE
If You Have Any of These Problems
Mode
Symptom
Cause / Action
page
During Standby
"JAN-01-1999" 
appears on the display.
The battery is not installed or the battery is completely 
discharged. Install a New battery and reset the clock. 
During Transmission
Document doesn't 
feed/multiple feeds
1. Check that your document is free of staples and paper
clips, and that it is not greasy or torn.
2. Check that your document is the right type to send through
an ADF by consulting the list on "Originals You Cannot
Send".  If your document has the characteristics listed, use
the Platen Glass instead.
Document jam
"REMOVE MISFED ORIG. IN ADF" will appear on the display 
if the document jams.
--
Transmission Copy 
Quality
Vertical lines on the 
transmitted document
Check own copy quality.  If copy is OK, your machine has no 
problem, report to the receiving party that they have a 
problem.  If copy is NG, clean the Document Scanning Area.
Transmitted document 
is blank
1. Make sure the document is set face up on the ADF and
face down on the Platen Glass.
2. Check own copy quality.  If copy is OK, your machine has
no problem, report to the receiving party that they have a
problem.  If copy is NG, clean the Document Scanning
Area.
During Reception
No recording paper
"ADD PAPER" will appear on the display if the paper runs out.
Recording paper jam
The information code 001, 002, 003, 007 or 008 will appear on 
the display if the paper jams.
Recording paper 
doesn't advance into 
machine
Make sure that there is paper in the Paper Tray. Follow the 
instructions for loading paper.
--
Recording paper 
doesn't eject after 
printing
Check to see if the recording paper is jammed inside of the 
machine.
Recording papers are 
not stacked in 
sequence.  Machine 
does not print from the 
last page received.
If memory becomes full during reception, the machine will 
start to print from the 1st received page.  We recommend that 
optional flash memory card is installed if this symptom occurs 
frequently.
Document auto 
reduction doesn't work
Check Print Reduction settings.
Out of toner
"ADD TONER" will appear on the display if the Toner Cartridge 
runs out of toner.
Troubleshooting