Samsung SF-560 User Manual

T

ROUBLESHOOTING

[Comm. Error]

The machine has a 
communication problem.

Ask the sender to try again.

CRU Fuse Error

The machine has a problem 
with recognizing the new toner 
cartridge.

Please contact a service 
representative.

Document Jam

The loaded document has 
jammed in the ADF (Automatic 
Document Feeder).

Clear the document jam. See 
page 6.2.

[Door Open]

The front or rear cover is not 
securely latched.

Close the cover until it locks into place.

Group Not Available

You have tried to select a 
group location number where 
only a single location number 
can be used, such as when 
adding locations for a 
broadcasting operation.

Just use a one-touch or speed dial 
number or dial a number manually 
using the number keypad.

[Incompatible]

The remote machine does not 
have the requested feature, 
such as a delayed 
transmission.
It also occurs if the remote 
machine does not have enough 
memory space to complete the 
operation you are attempting.

Reconfirm the remote machine’s 
features.

[Jam 1] or
[No Cartridge]

The toner cartridge is not 
installed.

Install the toner cartridge. See 
page 1.8.

Line Busy

The remote person did not 
answer or the line is already 
engaged.

Try again after a few minutes.

[Line Error]

Your machine cannot connect 
with the remote machine or 
has lost contact because of a 
problem with the phone line.

Try again. If the problem persists, wait 
an hour or so for the line to clear and 
try again.
Or, turn the ECM on. See page 4.6.

Load Document

You have attempted to set up a 
copy or fax operation with no 
document loaded.

Load a document and try again.

[Low Heat Error]

There is a problem in the fuser 
unit.

Unplug the power cord and plug it back 
in. If the problem persists, please 
contact a service representative.

Open Heat Error

[Over Heat]

[LSU Error]

A problem has occurred in the 
LSU (Laser Scanning Unit).

Unplug the power cord and plug it 
back in. If the problem persists, 
please call for service.

Memory Full

The memory is full.

Delete unnecessary documents, 
retransmit after more memory 
becomes available or split the 
transmission into more than one 
operation.