Panasonic DP-6010 User Manual
57
Making Copies
B4·FLS
NOTE
Other Features
Skyshot Mode
■
■
■
■
■ Skyshot allows copying a manuscript without generating dark borders
even if the platen cover or ADF is opened.
Skyshot mode eliminates dark borders around the originals, and is especially convenient for
copying small-sized originals like bank checks or documents with unusual shapes (round, oval,
etc.). These documents can be reproduced without generating any unnecessary black areas
simply by making a copy with the cover open.
copying small-sized originals like bank checks or documents with unusual shapes (round, oval,
etc.). These documents can be reproduced without generating any unnecessary black areas
simply by making a copy with the cover open.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in
advance. (See page 72)
■
■
■
■
■ Digital Skyshot Mode
1
Place the Original on the platen
(Opening the Platen Cover/ADF)
(Opening the Platen Cover/ADF)
3
Press START
# Press the FUNCTION Key.
$ Touch the COPIER SETTINGS button.
% Touch the [ button to advance to the 02/04 Display
Screen of Copier Settings menu.
& Touch the 06 Digital skyshot mode button.
( Select the desired function and touch the OK button.
06 Digital skyshot setting
No
: None
Freeshp (Free shape) : Copy is made with slant.
Parallel
Parallel
: Copy is made to parallel.
(within 5 degrees)
C An incorrect exposure may occur when there is a black line at the edge of
the original or an image which the copier interprets as a black pattern in the
skyshot mode.
skyshot mode.
C An incorrect position detection of the original may occur when a strong light
shines onto the glass during skyshot mode.
Select the Digital Skyshot Mode
The Digital Skyshot has been 2 modes ( or ).
The default setting of Digital Skyshot Mode is “None”.
Before using this mode, select each setting by using the Function setting.
The default setting of Digital Skyshot Mode is “None”.
Before using this mode, select each setting by using the Function setting.
(
2
)
copy
copy
copy
copy
P056-057_4510(pb).p65
7/31/02, 10:45 AM
57