Samsung CLX-318X User Manual

Wireless network setup (CLX-3185FW/CLX-3185WK only)_ 6

If you set the computer’s wireless network as DHCP, it will take 

several minutes to receive the IP address.

10.The Wireless Network Setting Complete window appears.

Select Yes if you accept the current settings and continue the setup 

procedure.
Select No if you want to return to the beginning screen. 
Then, click Next.

11.Click Next when the Confirm Printer Connection window appears.
12.Select the components to be installed. Click Next.

After selecting the components, you can also change the machine 

name, set the machine to be shared on the network, set the machine 

as the default machine, and change the port name of each machine. 

Click Next.

13.After the installation is finished, a window asking you to print a test 

page appears. If you want to print a test page, click Print a test 

page.
Otherwise, just click Next and go to step 16.

14.If the test page prints out correctly, click Yes.

If not, click No to reprint it.

15.To register as a user of the machine in order to receive information 

from Samsung, click On-line Registration.

16.Click Finish.

Ensure you have next items ready.

•

Access point

•

Network-connected computer

•

Software CD that provided with your machine

•

The machine installed with a wireless network interface

•

USB cable

When the items are ready, follow below steps:
1. Check whether the USB cable is connected to the machine.
2.Turn on your computer, access point and machine.
3.Insert the supplied software CD into your CD-ROM drive.
4.Double-click the CD-ROM icon that appears on your Macintosh 

desktop.

5.Double-click the MAC_Installer folder.
6.Double-click the Installer OS X icon.
7.Enter the password and click OK.
8.The Samsung Installer window opens. Click Continue.
9.Read the license agreement and click Continue.
10.Click Agree to agree to the license agreement.
11.Select Easy Install and click Install. Easy Install is recommended 

for most users. All components necessary for machine operations 

will be installed.
If you select Custom Install, you can choose individual components 

to install.

12.When the message which warns that all applications will close on 

your computer appears, click Continue.

13.Select the Wireless Setting and Installation option and then click 

OK.

14.The software searches the wireless network.

If the searching has failed, you may check if the USB cable is 

connected between the computer and machine properly, and 

follow the instruction on the window.

15.After searching, the window shows the wireless network devices. 

Select the name (SSID) of access point you are using and click 

Next.

If you cannot find out the network name you want to choose, or 

if you want to set the wireless configuration manually, click 

Advanced Setting.

•

Enter the wireless Network Name:  Type the SSID of 

access point you want (SSID is case-sensitive).

•

Operation Mode:  Select Infrastructure.

•

Authentication:  Select an authentication type.

Open System:  Authentication is not used, and encryption 

may or may not be used, depending on the need for data 

security.
Shared Key:  Authentication is used. A device that has a 

proper WEP key can access the network.
WPA Personal or WPA2 Personal:  Select this option to 

authenticate the print server based on WPA Pre-Shared 

Key. This uses a shared secret key (generally called Pre 

Shared Key passphrase) which is manually configured on 

the access point and each of its clients.

•

Encryption:  Select the encryption. (None, WEP64, WEP128, 

TKIP, AES, TKIP AES)

•

Network Key:  Enter the encryption network key value.

•

Confirm Network Key:  Confirm the encryption network key 

value.

•

WEP Key Index:  If you are using the WEP Encryption, select 

the appropriate WEP Key Index.

The wireless network security window does appear when the 

access point has security setting.
The wireless network security window appears. The window 

may differ according to its security mode, WEP or WPA.

•

Select Open System or Shared Key for the authentication 

and enter WEP security key. Click Next.
WEP (Wired Equivalent Privacy) is a security protocol 

preventing unauthorized access to your wireless network. 

WEP encrypts the data portion of each packet exchanged 

on a wireless network using a 64-bit or 128-bit WEP 

encryption key.

•

Enter the WPA shared key and click Next.
WPA authorizes and identifies users based on a secret key 

that changes automatically at regular intervals. WPA also 

uses TKIP (Temporal Key Integrity Protocol) and AES 

(Advanced Encryption Standard) for data encryption.

16.The window shows the wireless network setting and check if settings 

are right. Click Next.

•

If the IP address assignment method is DHCP, check if DHCP is 

shown in the window. However, if it shows Static, click Change 

TCP/IP to change the assignment method to DHCP.

•

If the IP address assignment method is Static, check if Static is 

shown in the window. However, if it shows DHCP, click Change 

TCP/IP to enter the IP address and other network configuration