Samsung CLX-318X User Manual

Wireless network setup (CLX-3185FW/CLX-3185WK only)_ 9

5.Enter the machine’s new information into the configuration window as 

follows. In a corporate intranet, you may need to have this 

information assigned by a network manager before proceeding.

•

MAC Address: Find the machine’s MAC address from the Network 

Configuration Report and enter it without the colons. For 

example, 00:15:99:29:51:A8 becomes 0015992951A8.

•

IP Address: Enter a new IP address for your printer.

For example, if your computer’s IP address is 192.168.1.150, 

enter 192.168.1.X. (X is number between 1 and 254 other than 

the computer’s address.)

•

Subnet Mask: Enter a Subnet Mask.

•

Default Gateway: Enter a Default Gateway.

6.Click Apply, and then click OK. The machine will automatically print 

the Network Configuration Report. Confirm that all the settings are 

correct.

7.Click Exit to close the SetIP program.
8.If necessary, restart the computer’s firewall.

For using SetIP program, disable the computer firewall before continuing 

by performing the following:

The path and UIs may differ by Macintosh OS version. Refer to the 

Macintosh OS manual.

1.Open System Preferences.
2.Click Security.
3.Click the Firewall menu.
4.Turn firewall off.

The following instructions may vary for your model.

1.Connect your machine to the network with a network cable.
2.Insert the Installation CD-ROM, and open the disk window, select 

MAC_Installer > MAC_Printer > SetIP > SetIPApplet.html.

3.Double-click the file and Safari will automatically open, then select 

Trust. The browser will open the SetIPApplet.html page that shows 

the printer’s name and IP address information. 

4.Click on the   icon (third from left) in the SetIP window to open the 

TCP/IP configuration window.

5.Enter the machine’s new information into the configuration window as 

follows. In a corporate intranet, you may need to have this 

information assigned by a network manager before proceeding.

•

MAC Address: Find the machine’s MAC address from the Network 

Configuration Report and enter it without the colons. For 

example, 00:15:99:29:51:A8 becomes 0015992951A8.

•

IP Address: Enter a new IP address for your printer.

For example, if your computer’s IP address is 192.168.1.150, 

enter 192.168.1.X. (X is number between 1 and 254 other than 

the computer’s address.)

•

Subnet Mask: Enter a Subnet Mask.

•

Default Gateway: Enter a Default Gateway.

6.Select Apply, then OK, and OK again. The printer will automatically 

print the configuration report. Confirm that all the settings are correct. 

Quit Safari. You may close and eject the installation CD-ROM. If 

necessary, restart the computer’s firewall. You have successfully 

changed the IP address, subnet mask, and gateway.

Before starting, you will need to know the network name(SSID) of your 

wireless network and the network key if it is encrypted. This information was 

set when the wireless router(access point) was installed. If you do not know 

about your wireless environment, please ask the person who has set up 

your network.
To configure wireless parameters, you can use SyncThru™ Web Service.

Before starting the wireless parameter configuration, make sure cable 

connection status. 
1.Check whether the network cable is connected to the machine. If not, 

connect the machine with a standard network cable.

2.Start a web browser such as Internet Explorer, Safari or Firefox and 

enter your machine’s new IP address in the browser window.
For example:

3.Click Go to access the SyncThru™ Web Service.
4.Click Login on the upper left of the website.

A Login page appears. 

5.Type in the ID and Password then click Login.

If it’s your first time logging into SyncThru™ Web Service, type in the 

below default ID and password.

•

ID:  admin 

•

Password:  sec00000 

6.When the SyncThru™ Web Service window opens, click Settings > 

Network Settings.

7.Click Wireless > Wizard.

Wizard will help you setup the wireless network configuration. 

However, if you want to set the wireless network directly, select 

Custom.

8.Select the one Network Name(SSID) in the list.

•

SSID: SSID (Service Set Identifier) is a name that identifies a 

wireless network. Access points and wireless devices attempting 

to connect to a specific wireless network must use the same 

SSID. The SSID is case-sensitive.

•

Operation Mode: Operation Mode refers to the type of wireless 

connections (See "Wireless network name and Network Key" on 

page 1).

-

Ad-hoc: Allows wireless devices to communicate directly with 

each other in a peer-to-peer environment.

-

Infrastructure: Allows wireless devices to communicate with 

each other through an access point.