Panasonic DP-8020P User Manual

150

 Chapter 5    Internet Fax

Program the following parameters to use this machine as a relay station in Function Parameters:

1

Fax Parameters
“142 Relay XMT”

Selecting whether the machine will accept and perform G3 Relayed 
transmission.

Machine will not accept a Relay XMT request.

Machine will accept a Relay XMT request.

2

Fax Parameters
“143 Relay XMT Report”

Selecting how the COMM. Journal for Relayed transmission is sent to 
the originator.

Does not send.

The COMM. Journal is always sent after a Relay communication is 
completed or has failed.

• Inc Only

The COMM. Journal is sent if the Relay communication to the 
destination has failed.

3

User Parameters
“36 Relay XMT Password”

Enter a Relay XMT Password (up to 10 characters) to be used for the 
protection against unauthorized (outside) stations from accessing 
your machine to relay messages to a G3 fax machine via PSTN. This 
password should be given out to authorized people only.

z

Program “36 Relay XMT Password” to enable this machine 
to work as a relay station.

As the relay password is transmitted in the header of Email, it should 
be differentiated from the Email address used by Email or Internet 
Fax. A relay password pre-programmed in this way would be easy to 
identify when Internet Fax is received.

4

User Parameters
40 to 49
“Relay Domain (01)” to “Relay 
Domain (10)”

Register up to 10 Domain Names (up to 30 characters) that your 
machine will accept Relayed transmission.
Requests to relay a message to another G3 fax machine via PSTN.
Ex: Registered Domain Names
 (01): panasonic.co.jp
 (02): abc.iFax.com
 (03): panasonic.com

z

To increase network security by protecting from third party 
access to the relay station, enter a relay-permitted domain 
name and an administrator Email address for every relay 
station.

z

If the whole domain name is left blank, Internet Fax will 
receive Relayed transmission requests from all the domain 
names.