Panasonic DP-8020P User Manual

212

 Chapter 9    Solving Problems

Information Codes

In the event of communication failures, information codes appear in the transmission result or 
transaction journal.

When an information code is displayed, take necessary action as recommended in the table below. 
For definitions of the information code not found here, refer to the User (U)/Jam (J)/Machine (E) Error 
Codes in the Operating Instructions (For Basic Operations) of provided booklet.

030

Document is misfeeding.

Reload the document properly.
Remove the document jam.
Adjust the Original Guides.

031

Document is too long or 
jammed.
Document length exceeds 
2 meters in “Std” and “Fine” 
mode only. 
The length limitation for “Super 
Fine” and “600dpi” mode is 
subject to the available memory 
size.

Reload the document properly.
Remove the document jam.

Operating 
Instructions (For 
Basic Operations)

061

ADF Cover is open.

Close the ADF Cover.

400

During initial handshake, 
receiving station did not respond 
or a communication error 
occurred.

Check with the other party.
Reload the document and send again.

401

Remote station required a 
receiving password to receive 
the document. Remote station 
does not have Confidential 
Mailbox.

Check the remote station.

402

During initial handshake, 
communication error occurred.

Reload the document and send again.

403

No polling capability at the 
remote side.

Ask remote side to set to be polled.

404/405

During initial handshake, 
communication error occurred.

Reload the document and send again.

406

Transmission password does 
not match.
Receiving password does not 
match.
Received from an unauthorized 
station in the Selective 
Reception mode.

Check the password or telephone number in 
Address Book.

A3

486 mm

(19 in)

1387 mm

(54 in)

730 mm

(28 in)

1387 mm

(54 in)

B4

577 mm

(22 in)

866 mm

(34 in)

A4

684 mm

(26 in)

1027 mm

(40 in)