Intel Desktop Board D945GRW BOXD945GRWLK User Manual

10 

 

Table 1 summarizes the major features of the board. 

picoBTX Form Factor (8.00 inches by 10.50 inches [203.20 millimeters by 
266.70 millimeters]) 

Support for the following: 
• Intel

®

 Pentium

®

 D processor in an LGA775 socket with an 800 MHz system bus 

• Intel

®

 Pentium

®

 4 processor in an LGA775 socket with an 800 or 533 MHz 

system bus 

• Intel

®

 Celeron

®

 processor in an LGA775 socket with a 533 MHz system bus 

•  Four 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets 
•  Support for DDR2 667 or DDR2 533 DIMMs 
•  Support for up to 4 GB of system memory 

Intel

®

 945G Chipset, consisting of: 

• Intel

®

 82945G Graphics Memory Controller Hub (GMCH) 

• Intel

®

 82801G I/O Controller Hub (ICH7) 

Intel

® 

GMA950 onboard graphics subsystem 

Intel

®

 High Definition audio subsystem with 8-channel (7.1) analog outputs using 

the Realtek ALC880 audio codec 

Legacy I/O controller for serial, parallel, and PS/2* ports 

Support for USB 2.0 devices 

•  Eight USB ports  
•  One serial port 
•  One parallel port 
•  Two Serial ATA interfaces 
•  One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support 
•  PS/2 keyboard and mouse ports 

Refer to Table 2 on page 11 for a description of LAN subsystem options. 

• Intel

®

 BIOS (resident in the SPI Flash device) 

•  Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, 

and SMBIOS 

One PCI Express* x16 bus add-in card connector (for use with a PCI Express x16 
riser card) 

•  Support for PCI Express Revision 1.0a 
•  Suspend to RAM support 
•  Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports 

continued