Panasonic DP-C106 User Manual
Scanner Error Codes
Problem Solving
107
Scanner Error Codes
An Error Code may indicate that an electrical or mechanical problem exists in
the Scanner. Typical error codes, xx digit numbers, are followed by the words
CALL FOR SERVICE
the Scanner. Typical error codes, xx digit numbers, are followed by the words
CALL FOR SERVICE
.
If an error code should appear on the Scanner Control Panel perform the
following steps:
1.
following steps:
1.
Write down the code number.
2.
Switch Off the Scanner power switch.
3. Wait
20
seconds.
4.
Switch On the Scanner power switch.
•
If the problem is resolved, resume printing or copying.
•
If the problem is not resolved, call your Authorized Panasonic
Representative and report the Error Code.