Xerox FS 5250 User Manual
Connections and Installation
Xerox FS 5250, User’s Guide
Xerox FS 5250, User’s Guide
- 23 -
6.5.1 TEST Function
The test printout pages can be generated in two ways - via the address switch
or via the line by activating the T function . For details on the T function, please
see the section "Quick Reference Guide of the Supported FSL Functions".
or via the line by activating the T function . For details on the T function, please
see the section "Quick Reference Guide of the Supported FSL Functions".
Test via the address switch
1.
Turn the address switch to the "T" position. A settings printout will be
generated ( test 4).
generated ( test 4).
2.
Turn the switch away from the T- position.
3.
When the CU indicator flashes, turn the switch back to the T-position.
4.
The printer will now enter Online HEX Dump mode and print all data
received in on-line HEX dump format ( test 1).
received in on-line HEX dump format ( test 1).
5.
Hex dump mode is terminated by turning the address switch away from
the T-position and then back again.
the T-position and then back again.
Keep the settings printout together with this manual for future
reference.
reference.
Finally, a settings printout can also be generated at power on by activating
function Y120. See the section "Quick Reference Guide of the Supported
FSL Functions" for details.
function Y120. See the section "Quick Reference Guide of the Supported
FSL Functions" for details.
NOTE:
You are recommended when installing for the first time to carry out
Test 4, Settings Printout, to check whether the printer is set to the
correct language. if the language is incorrect, contact your systems
support or your point of purchase.
You are recommended when installing for the first time to carry out
Test 4, Settings Printout, to check whether the printer is set to the
correct language. if the language is incorrect, contact your systems
support or your point of purchase.