Xerox CX250 User Manual

192

Appendix A– Setting Parameters

ˆ

prints multiple copies of the same image on one 

sheet so that the sheet is used to maximum capacity. This method is 
used mainly for printing business cards.

If you select 

, the following option is available:

 enables 

 jobs to be printed, cut, 

stacked, and bound in the most efficient manner while 
preserving the original sorting. A job’s pages, booklets, or 
books are sorted in a Z-shape. In other words, each stack of 
pages is sorted in consecutive order. When stacks are piled one 
on top of another, the entire job is already sorted up or down.

ˆ

 prints pages ready for applying a book-finishing 

technique in which the pages of a book are attached through 
stitching or stapling in the spine fold—for example, brochures.

ˆ

prints pages ready for applying a book-finishing 

technique in which the pages of a book are attached by trimming 
the spine fold, roughening the edges of the gathered pages, and 
gluing them together—for example, hardcover books.

Sizes

1.

In the 

 list, select the desired paper stock size. If you select 

, type the height in the 

 box and width in the 

 box, and then 

select 

 or 

.

2.

In the 

 list, select the desired paper stock type. The default 

setting is 

. When this option is selected, your job 

is printed on the media type that is defined on the Xerox DocuColor 
240/250 printer-copier.

When you use the Step & Repeat template for VI jobs, the system 
prints the job in Z-Sorting mode. This enables imposed VI jobs to be 
sorted for cut-and-stack finishing.

It is possible to use specific step-and-repeat templates to print several 
different images on one sheet.

This option is available only if you have the Pro configuration.

Note: If you select Cut & Stack, you cannot make changes or enter a 
valid exception on the Exceptions tab.