Xerox CX250 User Manual
200
Appendix A– Setting Parameters
APR
1.
In the
APR options
area, select one of the following options:
•
Print with high res:
replaces low-resolution images in your job
with high-resolution images that are located in a specified APR
path.
path.
•
Print with low res:
prints the job with the existing low-resolution
images—for example, for proofing purposes.
2.
In the
Use APR mask from
area, select one of the following options:
•
PostScript image:
uses the masking data contained in the low-
resolution image file.
•
High res:
uses the masking data contained in the high-resolution
image file.
•
Both:
uses the masking data that is common to both high-
resolution and low-resolution image files. For example, if the
images defined by the two sets of masking data overlap, the
overlapping area is RIPed.
images defined by the two sets of masking data overlap, the
overlapping area is RIPed.
Note: This parameter is available only if you have the Pro configuration.
Note: If the masking data in the low-resolution image file defines a
completely different part of an image than the masking data in the
high-resolution file, no masking data is used.
completely different part of an image than the masking data in the
high-resolution file, no masking data is used.