Xerox CX250 User Manual

222

Appendix B– Restoring the Spire CX250 Color Server Software

When the following windows appears, click 

. 

Restoring the Last Image Configuration

To restore the Last Image configuration, the operating system must be in 
Last Image mode. See Verifying the Current Recovery Type on page 221.

1.

Turn on the Spire CX250 color server.

2.

If required, return the ghost file or files that you moved to an external 
device to partition 

3.

Using the tip of a pen or similar object, press the 

 (OS recovery) 

button on the front of the Spire CX250 color server.

4.

From your client PC, Mac client, or portable workstation, connect to 
the Spire CX250 color server via the RDC utility. 

Note:  If the current recovery type is Factory Default, the message Current 
Recovery type is Factory Default appears.

Note:  If the Spire CX250 color server is on and the Spire Application 
workspace is open, quit the Spire Application software and wait for the Spire 
icon to disappear from the desktop taskbar.

Before

After

Important:  If you only want to verify the current recovery type, but do not 
want to initiate the recovery process, press the RCVR (OS recovery) button 
again to exit the recovery mode (LED 7 turns off).

Note:  You can change the configuration only when the operating system 
recovery mode is initiated (LED 7 illuminates steady orange).

Note:  This step is required only on the CX250 basic configuration.