Xerox 7232 User Manual
Xerox WorkCentre 7232/7242 System Administration Guide
103
7 EtherTalk
This chapter explains how to set up the machine to operate on an EtherTalk network.
The following information is provided.
The following information is provided.
Information Checklist – page 103
EtherTalk Environments – page 104
EtherTalk Installation – page 104
Installation Procedure – page 104
Network Communication Setup – page 104
Workstation Setup – page 105
Test Print – page 105
EtherTalk Environments – page 104
EtherTalk Installation – page 104
Installation Procedure – page 104
Network Communication Setup – page 104
Workstation Setup – page 105
Test Print – page 105
Information Checklist
Before installing EtherTalk on the machine, make sure that the following items are
available or have been performed.
available or have been performed.
If problems are encountered during the machine installation, refer to the Problem
Solving chapter for assistance.
Solving chapter for assistance.
CAUTION: Do not connect the network cable to the machine until instructed to
do so.
do so.
Item
By
An existing operational EtherTalk network with Macintosh workstations
equipped with Ethernet network interface cards is required. These
procedures are not designed to install an EtherTalk network.
equipped with Ethernet network interface cards is required. These
procedures are not designed to install an EtherTalk network.
Customer
Macintosh System versions 7.5 or later, 8.x, 9.x, or Mac OS X 10.x
Customer
Test the machine to make sure that it is installed fully and functioning
correctly.
correctly.
Customer
Install the Adobe PS print driver, or PPD (optional).
Customer