Xerox 7232 User Manual
13 Scanning Services
146
Xerox WorkCentre 7232/7242 System Administration Guide
2.
A login/password popup will be displayed to authenticate users with the Kerberos
server. Enter the login and password.
server. Enter the login and password.
The login and password is passed on to the Kerberos server and if a match is found
the user is successfully authenticated.
the user is successfully authenticated.
The user needs to enter a valid login and password for the FTP/SMB server. This may
or may not be the user’s Kerberos login/password, rather it is a login/password that is
accepted by the FTP/SMB server.
or may not be the user’s Kerberos login/password, rather it is a login/password that is
accepted by the FTP/SMB server.
When using Network Scanning, Kerberos authentication has the following effect on
the feature:
the feature:
1.
Select [Network Scanning].
2.
A login/password popup will be displayed to authenticate users with the Kerberos
server. Enter the login and password.
server. Enter the login and password.
The login and password is passed on to the Kerberos server and if a match is found
the user is successfully authenticated.
the user is successfully authenticated.
Through the templates/repositories, the users will enter a valid login/password for FTP/
SMB servers. This may or may not be the user login/password; rather it is a login/
password that is accepted by the FTP/SMB server.
SMB servers. This may or may not be the user login/password; rather it is a login/
password that is accepted by the FTP/SMB server.
Public templates are accessible to any user. Private templates require a password that
may or may not be different from the Kerberos password.
may or may not be different from the Kerberos password.
Remote Authentication Network Communication Setup
1.
Connect the machine to the network.
2.
Press the <Log In/Out> button on the control panel, and then type the Key
Operator login ID to enter the Key Operator mode.
Operator login ID to enter the Key Operator mode.
NOTE: The passcode may also be required depending on the machine configuration.
3.
Press the <Machine Status> button on the control panel, and then select the
[Tools] tab on the screen.
[Tools] tab on the screen.
4.
Select [System Settings].
5.
Select [Connectivity & Network Setup].
6.
Select [Remote Authentication Server Settings].
7.
Select [Authentication System], and then select [Change Settings] and choose
[Kerberos (Windows 2000)] or [Kerberos (Solaris)]. Select [Save], if needed.
[Kerberos (Windows 2000)] or [Kerberos (Solaris)]. Select [Save], if needed.
8.
Select [Kerberos Server Settings], then [Kerberos Server 1], and then select
[Change Settings]. Select [Primary Server Name / Address] to enter the IP
address or server name, and then select [Change Settings]. When you entered
the server name, the DNS information needs to be populated through Internet
Services.
[Change Settings]. Select [Primary Server Name / Address] to enter the IP
address or server name, and then select [Change Settings]. When you entered
the server name, the DNS information needs to be populated through Internet
Services.
9.
Select [Primary Server Port Number] and enter the port number. The default is
Port 88.
Port 88.