Xerox 7232 User Manual
16 Security
174
Xerox WorkCentre 7232/7242 System Administration Guide
Configure Remote Authentication for Kerberos (Windows 2000)
At your Workstation:
1.
With the Authentication Configuration web page still running, click Configure next
to the server you wish to use for Authentication. If not still running, perform steps 2
and 3 below.
to the server you wish to use for Authentication. If not still running, perform steps 2
and 3 below.
2.
If the web page is not still running, open your Web browser and enter the TCP/IP
address of the machine in the Address or Location field. Press Enter.
address of the machine in the Address or Location field. Press Enter.
3.
Click the Properties tab. Note that (as of February 2007) you can either return to
the Security folder and the Authentication Configuration hot link (discussed on the
previous page), or use the alternative path, stated below.
the Security folder and the Authentication Configuration hot link (discussed on the
previous page), or use the alternative path, stated below.
4.
Select the Remote Authentication Server / Directory Service folder in the list of hot
links, select Authentication System and pick Kerberos (Solaris) from the drop-
down list. Click Apply.
links, select Authentication System and pick Kerberos (Solaris) from the drop-
down list. Click Apply.
5.
Select Kerberos Server Settings.
6.
Enter the IP Address of the Primary Server (Domain Controller running the Key
Distribution Center service).
Distribution Center service).
7.
Enter the IP Address of the Secondary Server (Domain Controller), if necessary.
8.
Enter details of the Windows 2000 Domain in the Realm Name box. For example:
example.com.
example.com.
9.
Enter details for up to 4 alternate Domain Controllers and backups, if required.
10.
Click Apply, and supply the Administrator User name and password if prompted.