Xerox 7232 User Manual

•

Domain Name 1 - 3 – Enter the domain names for the domain name 1 to 3.

•

Connection Time-Out – Specify the maximum time period allowed for searching 
domains.

•

DNS Resolution via IPv6 First – Select whether or not to prioritize the resolution 
of the IPv6 DNS name over the IPv4 DNS name when [IP Mode] is set to [Dual 
Stack].

•

Release Registration – Allows DHCP resources to be released when the 
machine is powering down. This is a display-only item and shows “Enabled”.

•

Self Assigned Address (IPv4) – Allocates an IPv4 address without using a 
DHCP server. This check box is selected when [IP Address Resolution] is set to 
[Autonet]. This is a display-only item.

•

Self Assigned Address (IPv6) – Displays “Enabled”. This is a display-only item.

Select [Apply] to reflect the new settings.

Enter the user ID and passcode and then select [OK].

NOTE: The default user ID is "11111" and the default passcode is "x-admin".

When the reboot message appears, select [Reboot Machine].

This page allows you to configure the SNMP settings.

NOTE: Some settings on this page will only be available after you restart CentreWare 
Internet Services, or after the machine is switched off and on.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity] 
folder.

Select the plus symbol [+] to the left of the [Protocols] folder.

Select [SNMP Configuration].

Set up the following displayed in the frame.

•

Enable SNMP v1/v2c Protocols – Allows you to enable or disable the SNMP 
v1/v2c protocols. 

•

Edit SNMP v1/v2c Properties – Displays a page which allows you to set the 
following SNMP v1/2c properties.

Community Names:

-

Community Name (Read Only): Enter the community name used for display.