Xerox 7232 User Manual

•

Secondary Server IP Address & Port – Displays the secondary server WINS IP 
address when [Obtain WINS Server Address Automatically] is disabled. Change 
the address as necessary.

Select [Apply] to reflect the new settings.

Enter the user ID and passcode and then select [OK].

NOTE: The default user ID is "11111" and the default passcode is "x-admin".

When the reboot message appears, select [Reboot Machine].

This page allows you to configure the LPD settings.

NOTE: Some settings on this page will only be available after you restart CentreWare 
Internet Services, or after the machine is switched off and on.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity] 
folder.

Select the plus symbol [+] to the left of the [Protocols] folder.

Select [LPD].

Set up the following displayed in the frame.

•

Protocol – Displays whether the protocol is enabled or disabled.

•

Physical Connection – Displays “Ethernet”.

•

Port Number – Allows you to configure the port number.

•

TBCP Filter – Select the check box to enable TBCP Filter when processing 
PostScript data. This is available only when the optional PostScript kit is 
installed. When the transmission data includes binary or EPS data, disable this 
feature. 

•

Connection Time-Out – Allows you to specify the connection time-out period 
when transmission fails.

•

Maximum Number of Sessions – Enter the maximum number of sessions.

Select [Apply] to reflect the new settings.

Enter the user ID and passcode and then select [OK].

NOTE: The default user ID is "11111" and the default passcode is "x-admin".

When the reboot message appears, select [Reboot Machine].