Xerox D60327 User Manual

 This chapter provides details on:

Adding a TCP/IP attached printer
Setup of the KEEPALIVE TCP/IP feature

Before IPDS printing using TCP/IP can be accomplished, the following
points need to be checked:

1. AIX1.2 with PTF U436937 or later must be installed.

The above conditions must have been met and the basic TCP/IP
installation of the  PrintServer (IPDS) completed before direct AFP / IPDS
from PSF/AIX will be possible.

The port number is defined in the PSF/AIX SMIT “ Add a TCP/IP-Attached
Printer” panel.

1.

Enter Printer name

  

PSF/AIX uses the printer name you specify. Enter a name of up to 8
characters.

2.

Enter Internet address
The address in the TCP/IP network where the  PrintServer is installed.
Enter a 32-bit dotted decimal notation (e.g. 192.0.2.1).

3.

Enter Port number (5001)
If the output device is attached to PARALLEL 1 of the print server,
then select TCP/IP port number 5001. The value chosen must match
the value defined for the session in the  PrintServer (IPDS). 5001 is
the default port number of the first IPDS port no. in the  PrintServer
(IPDS).