Xerox D60327 User Manual

1.

Loosen the “thumbscrews”.

2.

Pull out the motherboard from the printer.

3.

Dismantle the two blankets and save the 4 screws  for later use (see step
4).

4. 

Prior to inserting the interface in the motherboard, you are recommended
to tighten loosely one screw in the interface’s rear panel and one in the
Centronics panel.

5.

Place the interface in the lower (middle) slot of the motherboard (marked
“A”) and place the Centronics cable in the upper slot (marked “ B”).

        

Centronics

Interface

6.

Now fasten the two screws you loosely inserted in step 3.

7. 

Fasten the two remaining screws.

8.

Re-insert the motherboard into the printer and fa sten the
“thumbscrews”.

NOTE:
Turn power ON and generate a settings printout - pressing the test key on
the rear panel - to check that the connection to the printer has been
established.