Xerox D60327 User Manual

Page of 187
Configuration
Xerox 4500 PS TR
47
4. Highlight the driver you wish to use and click “ Open”.
5. Now the Monitor Form screen with the attached devices will appear.
In this menu, you highlight the device to where you wish to download 
the PrintServer driver.
6. When selected, click “ OK” and the firmware is downloaded to the 
device.
3.3.9  Broadcasting
One of the strong features of PSinst32 is the ability to detect and configure
devices via the LAN. When the DLC port has been selected as download
port, it is possible to detect devices even before an IP address has been
associated. This kind of detection is called  broadcasting. A broadcast
message is issued through all bridges on the LAN. All associated devices
will be able to recognize this message, and will return an identification
message. The monitor sheet displays all devices which respond to the
broadcast message.
NOTE: 
Since broadcasting puts a heavy burden on the network, it
should be limited to a minimum.
If you only need to update the status of the devices
attached to the LAN, you are recommended to use the
“Refresh” command instead of the “Discover” to lower
network burden.
PCL/SCS
(Mainframe)
PCL/DCA
(AS/400)
3270 /SCS
(Mainframe)
XES/DCA
(AS/400)
XES/SCS
(Mainframe)
150/SCS
(AS/400)
170/SCS
(Mainframe)