Xerox D60327 User Manual
Configuration
Xerox 4500 PS TR
Xerox 4500 PS TR
71
Enabling IDAPS
Here the following group parameters are enabled / disabled.
If a group parameter is following the setup definitions for the various sessions,
e.g. IPDS input for a session, these must be configured. See the following
sections.
e.g. IPDS input for a session, these must be configured. See the following
sections.
BEGIN_CONFIGURATION IDAPS
LOCAL_MAC
4XXXXXXXXXXXX
SEL_MAC
UNIVERSAL
EARLY_TOKEN
NO
ENABLE_TCPIP
YES
ENABLE_NETWARE
NO
ENABLE_802_2
YES
ENABLE_NETBIOS
YES
ENABLE_PU_LU
NO
BOOT
YES
SHARETIMEOUT
20
HOLDTIMEOUT
600
IRQTIMEOUT
60
END
Defining PU_LU
NOTE: The PU_LU session requires the installation of an FSL or IPDS
add-on module.
To enable a PU_LU session (SNA), the following keywords are used. The
keywords must match the values configured in the chapter ”SCS Printing
Using SNA”.
keywords must match the values configured in the chapter ”SCS Printing
Using SNA”.
BEGIN_CONFIGURATION PU
BLOCKNUMBER
05D
IDNUMBER
0
(set exchange ID number)
REMOTE_MAC
000
(set
the
MAC
address
of
the
upstream
device)
LOCAL_SAP
4
REMOTE_SAP
4
END
Define SNA
To define a SNA session, see the following configuration example:
BEGIN_CONFIGURATION SNA_PRINT
3
INSTREAM_SNA_PRINT
SCS
END