Xerox D60327 User Manual
NetBEUI/NetBIOS Printing
Xerox 4500 PS TR
Xerox 4500 PS TR
97
The “Add Printer Wizard” will then open and you may select manufacturor
and printer model via the wizard.
and printer model via the wizard.
NOTE:
Windows ‘95 Xerox drivers may be obtained from the Xerox
Web Site at: http:\\www.xerox.com or you may contact your
point of purchase for details.
Windows ‘95 Xerox drivers may be obtained from the Xerox
Web Site at: http:\\www.xerox.com or you may contact your
point of purchase for details.
NOTE:
During the set up, you may need access to the original
installation CDROM for Windows ‘95 and NT.
During the set up, you may need access to the original
installation CDROM for Windows ‘95 and NT.
5.2 OS/2 Setup
To set up the OS/2 operating system follow these instructions:
1. Open an OS/2 window
2. Enter the following command at the prompt:
net view \\ <PrintServer name>
NOTE:
The default PrintServer name is “idaxxxxxx” where the six
“x’es” represent the last six digets of the MAC address
The default PrintServer name is “idaxxxxxx” where the six
“x’es” represent the last six digets of the MAC address
3. Press RETURN
4. Now enter this command:
net use lptx \\idaxxxxxx\Px_Printer_x
5. You have now captured your port for the PrintServer and you next
step is then to install a printer.
[
D:\
]
net view \\ida002efe
Shared resources at \\ida002efe
Net name
Type
Used as
Comment
-----------------------------------------------------------------------------------------------
P1_Printer_1 Print
P1_Printer_1 Print
idaPS printer
P2_Printer_2 Print
idaPS printer
The command completed successfully.
[
D:\
]
net use lpt1 \\ida002efe\P1_Printer_1
The command completed successfully.
Example of setup for OS/2