Xerox 7425/7428/7435 User Manual

Xerox Multifunction Devices 

Customer Tips 

dc09cc0453 
June 10, 2009 

…for the user 

This document enables you to access the extended features of the WorkCentre 
7425/7428/7435 in environments that do not have a custom print driver. 

Note: The commands and syntax used in this document requires familiarity with either 
PostScript (PS) or Printer Command Language (PCL). 

This document provides the Printer Description Language (PDL) commands and syntax 
for each feature. The following items are also included: 

•  A PCL table that describes the PCL features the WorkCentre supports and the syntax 

to use the feature. 

•  A PS table that describes the PS features the WorkCentre supports and the syntax to 

use the feature. 

This document is not intended to be a complete PS or PCL reference manual. It is a 
guide for using the PS and PCL commands with the WorkCentre 7425/7428/7435. Refer 
to these sources for additional PS and PCL information: 

•  PostScript Language Reference Manual, Third Edition, ISBN 0-201-38922-8, 
•  PCL5 Printer Language Technical Reference Manual 

),

 

•  Printer Job Language Technical Reference Manual 

), a 

Hewlett-Packard manual.

 

ƒ  Search the Feature Table to determine whether the feature you wish to use is 

supported. 

ƒ  Verify that the feature is supported by the platform. For example, the WorkCentre 

must have an optional finisher installed to use stapling commands. 

ƒ  Follow across the table to find the syntax listed for the PDL examples shown. 

Reference the “Dependencies/Caveats” section when working with PS and/or PCL 
commands.