Xerox B2500 MFP User Manual

B2500 MFP User’s Guide

13

1 Unpack the device.
2 Install the device respecting the security notices stated at the beginning of this booklet.
3 Remove all stickers from the machine.
4 Remove the plastic protection film from the display screen.

(1) Paper to be used must be inserted with the face down, and abutting the side and back guides. Not 

abutting the paper may cause feed failure, skewing, and paper jams.

(2) Amount of loaded paper must not exceed the loading mark. If the loading mark is exceeded, this 

may cause feed failure, skewing, and paper jams.

(3) Adding paper to the stack may cause double feeding, and should be avoided.
(4) When withdrawing the cassette from the main unit, always support it with both hands.

Pulling the cassette out quickly with one hand, may lead to it being unable to be supported, and being 

dropped.

(1) Paper curling must be corrected before printing.
(2) Curls must not exceed 10 mm.
(3) Care must be taken with storage to prevent feed faults and image defects due to leaving the paper 

in conditions of high humidity.
Adding paper to the pile, or splitting the pile may cause feeding problems, and must be avoided.

(1) Do not use paper which has become damp, or paper which has been left unused for a very long time.
(2) After opening the paper, it must be kept in a plastic bag.
(3) Do not use paper with waved ends, paper which is creased, paper with crumples, and any other non-

normal paper.

When moving the unit on a desk, it must be lifted, and not dragged.