Xerox 701P42722_EN User Manual

•

To inquire about the print data received by a printer named fxPS, enter the following 
command:

%lpq -PfxPS

•

To display a printer named fxPS in long format, enter the following command:

%lpq -PfxPS -l

On SunOS, the -C option can be used to specify the print format if the machine prints 
with the PostScript language in spool mode.

This section explains the functions which can be specified and printing operations 
which will be affected using the -C option.

NOTE: When the PostScript logical printer that was configured using CentreWare 
Internet Services and the -C option have been specified simultaneously, some of the 
actions cannot be guaranteed to work. Also, when specifying the PostScript logical 
printer as a default printer on UNIX, it is recommended not to use the -C option.

The following items can be set up using the -C option.

When selecting a paper tray, specify either a paper size or a tray. If the paper size is 
specified, the machine automatically searches and selects the tray.

The following parameters can be specified.

INTRAY1/intray1

Selects Tray 1.

INTRAY2/intray2

Selects Tray 2 (optional).

INTRAY3/intray3

Selects Tray 3 (optional).

INTRAY4/intray4

Selects Tray 4 (optional).

INTRAY5/intray5

Selects Tray 5 (manual feed).

INMF/inmf

Selects Tray 5 (manual feed).

A3/a3

Selects the tray which has A3 (297 × 420 mm/11.7 × 
16.5 inches) paper loaded.

B4/b4

Selects the tray which has B4 (257 × 364 mm/10.1 × 
14.3 inches) paper loaded.

A4/a4

Selects the tray which has A4 (210 × 297 mm/8.3 × 
11.7 inches) paper loaded.