Xerox 701P42722_EN User Manual

In the [Properties] frame, select the plus symbol [+] to the left of the [Port Settings] 
folder.

Select [USB].

Set up the following options to be displayed in the frame.

•

Auto Eject Time

•

Adobe Communication Protocol (Only available when the optional PostScript Kit is 
installed.)

NOTE: For more information about the optionss, refer to Properties in the CentreWare 
Internet Services chapter of the User Guide.

Select [Apply New Settings] to reflect the new setting.

Enter the user ID and password, then select [OK].

NOTE: The default user ID is "admin" and the default password is "x-admin".

When the reboot message appears, select [Reboot].

This is only available when the optional PostScript Kit is installed. This page allows you 
to configure the EtherTalk settings.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol 
Settings] folder.

Select [EtherTalk].

Set up the following options to be displayed in the frame.

•

Printer  Name

•

Zone Name

•

Printer Type

NOTE: For more information about the options, refer to Properties in the CentreWare 
Internet Services chapter of the User Guide.

Select [Apply New Settings] to reflect the new setting.

Enter the user ID and password, then select [OK].

NOTE: The default user ID is "admin" and the default password is "x-admin".

This page allows you to configure the SMB settings for the following options.

NOTE: Some settings on this page will only be available after you reboot the machine 
from CentreWare Internet Services, or after the machine is switched off and on.