Xerox Pro 385 User Manual
3-30
Sending a Fax
2
Press the Up or Down buttons to move through the memory until you
find the name you want.
find the name you want.
3
When the name and number you want appear, press the Start button to
initiate dialing.
initiate dialing.
Tone
If your telephone service is configured for pulse dialing, you may still need
to use Touch Tone signals to perform special operations by phone. Bank-
by-phone and voice mail are two examples of systems that require Touch
Tone signals. You can send Touch Tone signals by following these steps:
to use Touch Tone signals to perform special operations by phone. Bank-
by-phone and voice mail are two examples of systems that require Touch
Tone signals. You can send Touch Tone signals by following these steps:
1
Dial the number using pulse dialing.
2
When the remote phone answers, press *.
Any numbers you now press will be sent as Touch tones for the
remainder of the call.
remainder of the call.
3
Enter the remaining numbers required by the service. The machine
returns to the pulse mode after you complete the call.
returns to the pulse mode after you complete the call.