Xerox M15 User Manual

Page of 181
Page 1-6
 Xerox WorkCentre M15/M15i User Guide 
We
lc
om
e
Safety
Your Xerox product and supplies have been designed and tested to meet strict safety 
requirements. These include Safety Agency approval, and compliance to established 
environmental standards. Please read the following instructions carefully before operating the 
product and refer to them as needed to ensure the continued safe operation of your product. 
The safety testing and performance of this product have been verified using XEROX materials 
only.
Follow all warnings and instructions marked on, or supplied with the product.
This WARNING Mark alerts users to the possibility of personal injury.
This WARNING Mark alerts users to heated surfaces.
WARNING:  This product must be connected to a protective earthing circuit.
This product is equipped with a 3-wire type plug, provided with a protective earthing pin. This 
plug will fit only into an earthed power outlet. This is a safety feature. To avoid risk of electric 
shock, contact your electrician to replace the receptacle if you are unable to insert the plug 
into the outlet. Never use an earthed adapter plug to connect the product to a power source 
receptacle that lacks an earth connection terminal.
This product should be operated from the type of power source indicated on the marking 
label. If you are not sure of the type of power available, consult your local power company.
Do not allow anything to rest on the power cord. Do not locate the product where persons will 
step or trip on the cord.
Use of an extension cord with this product is not recommended or authorized. Users 
should check building codes and insurance requirements if a properly earthed extension cord 
is to be used. Ensure that the total ampere ratings of the products plugged into the extension 
cord do not exceed the extension cord ampere rating. Also, make sure that the total amperage 
of all products plugged into the wall outlets does not exceed the outlet rating.
Disconnect Device for this product is the power cord. To remove all electrical power to the 
product, disconnect the power cord from the power receptacle.
Your equipment is equipped with an energy saving device to conserve power when the 
machine is not in use. The machine may be left on continuously.
Unplug this product from the wall outlet before cleaning. Always use materials specifically 
designated for this product. Use of other materials may result in poor performance and could 
create a hazardous situation.