Xerox 5740 User Manual
XEROX WorkCentre
5735/5740/5745/5755/5765/5775/5790
Information Assurance Disclosure Paper
Ver. 2.00, March 2011
Page 11 of 50
USB Target port
Direct-connect printing; Xerox diagnostic tools (PSW and CAT) and Xerox copier assistant
Table 5 USB Ports
2.2. Fax Module
2.3.1. Purpose
The embedded FAX service uses the installed embedded fax card to send and receive images over the telephone
interface.
interface.
2.3.2. Hardware
The Fax module contains the fax modem and RJ-11 connector. The Fax modem implements the T.30 fax protocol.
The Fax module contains a CPU, BIOS, RAM, and Non-Volatile Memory.
The Fax module contains a CPU, BIOS, RAM, and Non-Volatile Memory.
Volatile Memory Description
Type (SRAM, DRAM, etc)
Size
User Modifiable
(Y/N)
(Y/N)
Function or Use
Process to Clear:
SDRAM
80MB
N
FAX Card volatile memory
No user image data
stored
stored
Additional Information:
All memory listed above contains code for execution and configuration information. No user or job data is permanently stored
in this location.
in this location.
Non-Volatile Memory Description
Type (Flash, EEPROM, etc) Size
User Modifiable
(Y/N)
(Y/N)
Function or Use
Process to Clear:
Flash ROM
4MB
N
FAX executable code.
No user image data
stored.
stored.
Additional Information:
All memory listed above contains code for execution and configuration information. No user or job data is stored in this location.
Table 6 Fax Module memory components
2.4. Scanner
2.4.1. Purpose
The purpose of the scanner is to provide mechanical transport of hardcopy originals and to convert hardcopy
originals to electronic data.
originals to electronic data.
2.4.2. Hardware
The scanner converts the image from hardcopy to electronic data. An optional document handler moves originals
into a position to be scanned. The scanner provides enough image processing for signal conditioning and
formatting. The scanner does not store scanned images. All other image processing functions are in the copy
controller.
into a position to be scanned. The scanner provides enough image processing for signal conditioning and
formatting. The scanner does not store scanned images. All other image processing functions are in the copy
controller.
The DADF/Scanner contains a CPU, BIOS, RAM, and Non-Volatile Memory
.