Xerox M118 User Manual

Sleep Mode
The machine automatically switches to the Sleep Mode after the Low Power Mode 
continues for a specified period of time. The Sleep Mode has a reduced power 
consumption compared to the Low Power Mode. In this mode, the screen is turned off, 
and the Power Saver light is on. The Sleep Mode is cancelled when the <Power Saver> 
button is pressed, or a fax or print job is received by the machine. The factory default 
setting of 1 minute is customer changeable within the range of 1 to 239 minutes.
For more information, refer to Power Saver in the Setups chapter on User Guide.

This section describes how to change the default time settings such as Auto Clear, 
Power Saver, and Scanning Timer. For more information, refer to Timer Settings in the 
Setups chapter on User Guide.

Press the <Log In/Out> button on the 
control panel.

Select [System Settings] using the 
<Select> button.

Enter the Key Operator password using 
the numeric keypad on the control 
panel.

NOTE: The default Key Operator password is “11111”.

Select [Confirm] using the <Select> button, or press the <Enter> button.

Select [Common Settings] on the 
[System Settings] screen using the 
<Select> button.

Press the <Enter> button.

Select [Timer Settings] on the [Common 
Settings] screen using the <Select> 
button.

Press the <Enter> button.

<Log In/Out> button