Xerox M118 User Manual
Copying Procedure
Xerox CopyCentre/WorkCentre 118 Quick Reference Guide
47
1.
Raise the document feeder or the
document glass cover.
document glass cover.
2.
Place the document face down on the
document glass, aligned with the tip of
the registration arrow near the top left of
the document glass.
document glass, aligned with the tip of
the registration arrow near the top left of
the document glass.
3.
Lower the document feeder or the
document glass cover.
document glass cover.
Constant Velocity Transport Glass
The Constant Velocity Transport (CVT) glass is the narrow strip of glass located at the
left-hand side of the document glass. When documents are fed from the document
feeder, they pass over the CVT glass to scan the images into memory automatically.
The CVT glass is not used when documents are placed on the document glass.
left-hand side of the document glass. When documents are fed from the document
feeder, they pass over the CVT glass to scan the images into memory automatically.
The CVT glass is not used when documents are placed on the document glass.
2. Select the Features
Various copy features can be selected for your copy job.
NOTE: If the machine remains idle for a set time (determined by the Key Operator),
the settings will be reset. For more information, refer to Auto Clear in the Setups
chapter on User Guide.
NOTE: If the machine remains idle for a set time (determined by the Key Operator),
the settings will be reset. For more information, refer to Auto Clear in the Setups
chapter on User Guide.
Constant Velocity Transport Glass