Xerox 480 ST User Manual
Xerox Document Centre System Administration Guide
Page 21 - 15
21.
E-m
a
il
2
1
. E-
ma
il
7.
Map the address book by choosing the appropriate Imported
Heading for each label.
Heading for each label.
NOTE
For correct address book operation the Display Name field must
map to a user name and the E-mail Address field must map to an
SMTP-format E-mail address, for example name@domain.com.
map to a user name and the E-mail Address field must map to an
SMTP-format E-mail address, for example name@domain.com.
8.
Click the Apply New Settings button to implement any
changes. If required, Click the Restore Settings button to
cancel any changes made and return to the previous values.
changes. If required, Click the Restore Settings button to
cancel any changes made and return to the previous values.
9.
When prompted, enter admin (lower case) into the User Name
field and 1111 or the current password into the Password field
and select OK.
field and 1111 or the current password into the Password field
and select OK.
Authentication
Authentication is used to identify and authorize the walk-up user via
their network login name and password.
their network login name and password.
NOTE
For Setup Procedures for the Authentication Server see
chapter 16 Internet Services, in the Section called
Authentication Server.
chapter 16 Internet Services, in the Section called
Authentication Server.
For Authentication to work it must be enabled from the Document
Centre 490/480/470/460 ST Control Panel / UI.
Centre 490/480/470/460 ST Control Panel / UI.