Toshiba 655 User Manual

When You Think Something Is Wrong With the Equipment    97

„

The original is jammed.

The original is unavailable on the 
equipment.

Check whether the original is available on the equipment.
For details, refer to Chapter 2 of the Copying Guide.

Paper is jammed.

The paper is unavailable on the 
equipment.

Check whether the paper is available on the equipment.
For details, refer to Chapter 1 of the Copying Guide.

The paper size setting registered for 
the equipment is inconsistent with 
paper in a drawer or on the bypass 
tray.

Match the size of the paper placed in the drawer or on the 
bypass tray and the size registered on the equipment.
For Details, refer to Chapter 1 and 2 of the Copying 
Guide.

The stack of paper exceeds the 
loading line indicated on the side 
guide.

Remove some paper to set it within the height limit line 
indicated on the side guide.

There is too little or too much 
clearance between the paper and the 
side guide of the drawer.

Adjust the space between the paper and the side guide or 
the end guide not to take much spaces.
For details, refer to Chapter 1 of the Copying Guide.

Hidden jammed paper has not been 
removed.

Check the sign again on the touch panel to see where the 
jam occurred.

Two or more sheets of paper are 
fed together.

Sheets of paper are stuck together.

Loosen the stack of paper well and set them again.

Sheets do not align when exiting.

Sheets are placed in the drawer with 
the wrong side up.

Check the printing side of the sheets and place them 
correctly. Information about the printing side may be given 
on the wrapping paper of the sheets.
If you cannot find which side is the printing side, try 
printing on both sides to see if the sheets align when 
exiting.