Xerox XK35C User Manual
8
Getting Started
Setup
Use the following procedure to initially set up your WorkCentre.
1
Open the shipping carton on a flat, stable surface. Remove all packing
materials and components. Check the set of components with the
component list. If any components are missing, callyour local Helpline.
materials and components. Check the set of components with the
component list. If any components are missing, callyour local Helpline.
2
Remove the wrapping from the machine, and place the machine in its
work location. To help guarantee trouble-free operation of your machine,
place it on a flat, stable surface near yourPC. Leave enough space to
allow for easy paper loading, paper unloading, and opening of the front
cover.
work location. To help guarantee trouble-free operation of your machine,
place it on a flat, stable surface near yourPC. Leave enough space to
allow for easy paper loading, paper unloading, and opening of the front
cover.
NOTE: Do not place your machine:
X
X
In direct sunlight.
X
X
Near heat sources or air conditioners.
X
X
In dusty or dirty environments.
3
Carefully remove the shipping tapes from the machine: the paper exit
tray in the front bottom area, both top sides and the paper feeder tray in
the back of the machine.
tray in the front bottom area, both top sides and the paper feeder tray in
the back of the machine.
Paper exit tray
Top side
Paper feeder tray
4
Pull the extension tray upwards out of the Automatic Paper Feeder until
it clicks into place. Also pull the paper exit tray outward from the front
base of the machine. Fold out the extender from the paper exit tray
when copying or printing.
it clicks into place. Also pull the paper exit tray outward from the front
base of the machine. Fold out the extender from the paper exit tray
when copying or printing.
ª