Sony UP-D23MD User Manual

Get

ting St

ar
te

d

Connections

7

For details of how to load the ink ribbon and paper, see 
“Loading an Ink Ribbon” on page 9 and “Loading 
Paper” on page 11.

After connecting the USB connecting cable (supplied) 
to the printer and the computer, connect the power cord. 
For details about the printer connection, refer to the 
manuals for the computer or other peripheral devices.

• Before connecting the printer to the computer, turn off 

the printer, computer, monitor, and all peripheral 
devices connected to the computer.

• Before connecting the printer to the computer, 

disconnect the power cord from the printer. Connect 
the power cord to the printer only after connecting the 
printer and the computer.

• The printer is provided with a USB interface that can 

be connected to any computer equipped with a USB 
interface.

• Follow the connection procedures described in the 

computer manual.

• Make sure that the interface cable is connected 

securely at both ends.

• The printer drive software provided with the printer is 

not suitable for using the printer connected to a 
network.

• Operation of the printer is not guaranteed for 

connection to a USB hub.

Paper tray

USB connecting  
cable

to (USB) 

connector