Xerox 7345 User Manual
200
Configuring S/MIME certificates with CentreWare Internet Services
To configure S/MIME certificates with CentreWare Internet Services, first enable HTTP communications
(as stated under Configuration of HTTP Communication Encryption in this section). Next, import an S/
MIME certificate from a Certificate Authority (in PKCS7 format). Finally, enable S/MIME.
(as stated under Configuration of HTTP Communication Encryption in this section). Next, import an S/
MIME certificate from a Certificate Authority (in PKCS7 format). Finally, enable S/MIME.
1.
Start a web browser.
2.
Enter the machine's IP address, beginning with “https,” into the Address box of your web browser, and
press the Enter key.
press the Enter key.
Example:
https://192.168.1.1/
3.
Click the Properties tab.
4.
Confirm that the Machine’s E-mail Address, under the Description hot link, is filled in. Also note that
to use E-mail with this machine, E-Mail has to be enabled and configured as stated in the Scan to E-
mail section of this guide.
to use E-mail with this machine, E-Mail has to be enabled and configured as stated in the Scan to E-
mail section of this guide.
5.
Click [+] on the left of the Security folder to display the items in the folder.
6.
Click Machine Digital Certificate Management.
7.
Click Upload Signed Certificate.
Note: Important: When importing a certificate, if the same certificate has been already registered in
[Local Device] or [Others], the certificate cannot be imported. Delete the existing certificate before
importing the new one.
[Local Device] or [Others], the certificate cannot be imported. Delete the existing certificate before
importing the new one.
a.
Enter the Password.
b.
Enter the Re-enter Password.
c.
Enter a file name for the file you want to import, or select the file to be imported by clicking the
Browse button.
Browse button.
d.
Click the Import button. When a screen to enter the user name and password appears, enter the
System Administrator user ID and password into User Name and Password, and then click OK.
System Administrator user ID and password into User Name and Password, and then click OK.
Note: The default user ID is "11111" and the default password is "x-admin".