Toshiba 6520c User Manual
3 BASIC COPY MODES
52 Before Using Copying Functions
Before Using Copying Functions
Default settings
This equipment is under its “default settings” when the power is turned ON, namely, if no setting change has been applied
yet, the equipment’s settings return to the default ones when the energy saving mode is cleared or the [FUNCTION
CLEAR] button on the control panel is pressed. The default settings for basic copy modes at installation are shown below.
yet, the equipment’s settings return to the default ones when the energy saving mode is cleared or the [FUNCTION
CLEAR] button on the control panel is pressed. The default settings for basic copy modes at installation are shown below.
The default settings are changeable. For details, refer to the MFP Management Guide.
Confirming the set functions
If you press [SETTINGS] on the touch panel, the menu shown below is displayed. On this menu, you can view the
functions that are currently set.
functions that are currently set.
Item
Default setting
Reproduction ratio
100%
Copy quantity
1
Paper selection
Automatic Paper Selection (APS)
Simplex/Duplex
1-sided original -> 1-sided copy
Density adjustment
Manual adjustment
Color mode
FULL COLOR
Original mode
TEXT/PHOTO
Finishing mode
When using the original glass:
NON-SORT NON-STAPLE
When using the RADF (Reversing Automatic Document Feeder):
SORT
Feeding mode when using the RADF
Continuous feed mode