Toshiba GA-1140 User Manual

The GA-1140 provides following tools to configure the GA-1140 network and printer settings:

You can configure the GA-1140 from the Touch Panel Display on the copier.  Since TopAccess, which

is another tool to set up the GA-1140, is enabled only on the TCP/IP network, setup operation from the

Touch Panel Display is useful when you setting up the GA-1140 for the first time, or when the GA-1140

is connected to your computer directly using the printer cable.

You can also configure the GA-1140 network and printer settings from TopAccess, a web-based utility.

TopAccess is functionally superior to setting up from Touch Panel Display in some setup.  In addition to

that TopAccess provides the setup options for GA-1140 same as the Touch Panel Display, TopAccess

provides setting options that cannot be set up from the Touch Panel Display.

 :

You can also configure the GA-1140 network and printer settings from Command WorkStation

which is an optional software for the PS3 Scan & HDD Upgrade (GE-1060+GE-1110).  For

further details about Command WorkStation, see 

Fiery Utilities Guide which is included in the

PS3 Scan & HDD Upgrade (GE-1060+GE-1110).

Administrators can perform following GA-1140 setup from the Touch Panel Display and TopAccess:

• Port Setup to specify Ethernet and parallel port settings.

P42 “Setting up the Port Options”

• Protocol Setup to specify the network protocols and print services for the active network systems

that will transmit print jobs to the GA-1140.

P46 “Setting up the Protocols”

• Printer Setup to specify default settings for printing, finishing options, emulation of the printer, PCL

options, and PostScript options.

P68 “Setting up the Printer Setup Options”

• TopAccess Setup to specify system options.

P94 “Setting up the TopAccess Setup Options”