Toshiba GA-1140 User Manual

In the TCP/IP options, you can assign the IP address, subnet mask, and gateway address of the GA-

1140.

You can set up the TCP/IP options from Touch Panel Display or TopAccess.  There are no difference

between the setup from Touch Panel Display and setup from TopAccess for TCP/IP options.

When you configure the GA-1140 TCP/IP options for the first time, these options can only set

from the Touch Panel Display.

The TCP/IP settings vary depending on the network environment.  The GA-1140 can be set up to

automatically obtain the TCP/IP settings using DHCP, RARP, or BOOTP server.  Also you can assign

the TCP/IP settings manually entering the addresses.  Before setting up the TCP/IP options, please

make sure the TCP/IP network system which built on your network.

Where either DHCP, RARP, or BOOTP server is in the network, the GA-1140 can be configured to get

TCP/IP settings automatically from the server.

When using the DHCP, RARP, BOOTP server to assign the IP address, the GA-1140 may

obtain different IP address every time after you reboot the printer.  It may cause the failure of

printing for the LPR printing and IPP printing in case that you configured the port using the IP

address of the GA-1140.  In this case, please use WINS server to solve the print server name of

GA-1140 instead of the IP address.

Where neither DHCP, RARP, nor BOOTP server is in the network, assign the static TCP/IP settings

manually.