Toshiba GA-1140 User Manual
52
Setting up the AppleTalk Options
:
The PS3 Upgrade (GE-1020) or PS3 Scan & HDD Upgrade (GE-1060+GE-1110) is required
for setting up the AppleTalk options.
When you use the GA-1140 in the AppleTalk environment for printing from a Mac OS computer, you
should enable the AppleTalk.
You can set up the AppleTalk options from Touch Panel Display or TopAccess. However, since setup
from the Touch Panel Display is only able to enable the AppleTalk, setup from TopAccess can
configure the sever name and AppleTalk zone that the GA-1140 should be connecting. Therefore, it is
recommended to configure the AppleTalk options from TopAccess rather than setting up from the
Touch Panel Display.
Setting up from Touch Panel Display
1
Accessing the Setting menu on the Touch Panel Display.
P18 “Accessing Setting Menu”
2
Accessing the AppleTalk Setup screen.
1. Press [PROTOCOL SETUP] on the Setting menu.
2. Press [APPLETALK] on the Protocol Setup menu.
3
To enable the AppleTalk, press [ENABLE] and
press [SET].
press [SET].
To disable the AppleTalk, press [DISABLE] and
press [SET].
press [SET].
• The screen returns to the Protocol Setup menu.
4
Perform resetting the GA-1140.
P109 “Resetting the GA-1140”
• The setting changes on the Network options is applied after resetting the printer. If you want to set
other network options, you can also proceed the operation for setup before resetting the printer.