Toshiba e-STUDIO2500c/3500c/3510c User Manual
9 BLINKING GRAPHIC SYMBOLS
320 Jam Symbols
4
Open the cover of the Bridge
Unit (optional). When the Fin-
isher (optional) is not installed,
skip this step.
Unit (optional). When the Fin-
isher (optional) is not installed,
skip this step.
5
Rotate the green dial down-
ward as indicated by the arrow
to move the paper to the exit
side.
ward as indicated by the arrow
to move the paper to the exit
side.
6
Remove any misfed paper
from the receiving tray or the
Bridge Unit (optional).
from the receiving tray or the
Bridge Unit (optional).
7
Close the cover of the Bridge
Unit (optional). Skip this step if
the Finisher (optional) is not
installed.
Unit (optional). Skip this step if
the Finisher (optional) is not
installed.
If no misfed paper can be found on the
exit side, perform step 8.
exit side, perform step 8.