Toshiba e-STUDIO2500c/3500c/3510c User Manual

Preparation 3- Setting Copy Paper    65

y

Place paper with its copy side up. (The copy side may be described on the wrapping 
paper.)

y

For the maximum number of sheets that can be set, see   P.54 “Acceptable copy 
paper”.

y

Be sure that the paper height does not exceed the line indicated on the side guide.

y

Fan and jog the paper well before placing it on the drawer. Set the paper for A to the 
right side, and set that for B to the left side. (The paper can be set neatly if you pile it 
up gradually and alternately in A and B.) Be sure that the centre lever is not open 
(see the labels attached in the Large Capacity Feeder).

y

Paper starts being fed out of the elevator tray (A) at first. When the paper on A has 
run out, the paper on B moves to the position of A and starts being fed.

y

Do not use wrinkled, folded or damp sheets of paper.

Close the drawer completely. The elevator tray automatically moves up to the paper 
feeding position.

Be careful not to let your fingers be caught when closing the drawer. This could injure 
you.

To change the paper type, see   P.61 “Changing the setting of 
paper size”.

Pull out the drawer until it comes to a 
stop.

A

B