Toshiba e-Studio 350 User Manual

Printing Guide — Printing from UNIX

315

If this option is not specified, the printer’s default value will be used.

The department access code can be set using the following option.

SUPPLEMENT:

How the equipment performs printing for an invalid department code print job, which
no department code or invalid department code is specified, varies depending on
the Department Code Enforcement setting that can be set from TopAccess Adminis-
trator mode.  When the Department Code Enforcement is enabled, the invalid
department code print job will be stored in the invalid department code print job list
without printing.  When the Department Code Enforcement is disabled, the invalid
department code print job will be printed.

The smoothing mode can be set using the following option.

Example: The command to set the smoothing mode is “lp –o smoothing=on filename”.

The thin line limit mode can be set using the following option.

Example: The command to set the thin line limit mode is “lp –o thinlinelimit=on filename”.

private=din

Process as a private print job.  The din is 5-digit Document ID 
number.

dept=code

Set the department access code. The code is a 5-digit numeric 
value.

smoothing=
on

ON

Set the smoothing mode.

smoothing=
off

OFF

Cancel the smoothing mode.

thinlinelimit=
on

ON

Set the thin line limit mode.

thinlinelimit=
off

OFF

Cancel the thin line limit mode.