Toshiba Studio 352 User Manual
EPA
E
NERGY
S
TAR ® (MFD)
The United States Environmental Protection Agency (EPA) has introduced a voluntary programme, the
E
NERGY
S
TAR programme, to encourage the widespread and voluntary use of energy-efficient technologies that enhance
the workplace, improve product performance and prevent pollution. As an
E
NERGY
S
TAR Partner, the TOSHIBA
TEC CORPORATION has determined that this copier model meets the
E
NERGY
S
TAR guidelines for energy
efficiency.
E
NERGY
S
TAR guidelines for this class of copier require
E
NERGY
S
TAR copiers to have a ‘Sleep Mode’
feature that automatically makes the copier enter the sleep mode after a period of inactivity. The copier must also
automatically change to a ‘Low Power Mode’ (Automatic Energy Save) after a period of time since the last usage.
Specifically, this copier complies with the following requirements.
automatically change to a ‘Low Power Mode’ (Automatic Energy Save) after a period of time since the last usage.
Specifically, this copier complies with the following requirements.
e-STUDIO352/452 Copier model (Base model)
‘Automatic Energy Save’-
‘Automatic Energy Save’-
The copier consumes less than 139.75 W (e-STUDIO352)/178.25 W (e-STUDIO452)
during Energy Save.
during Energy Save.
‘Automatic Energy Save’ Default Time-
The default time for the ‘Automatic Energy Save’ is 15 minutes.
‘Off Mode’
The copier consumes less than 15 W (e-STUDIO352)/20 W (e-STUDIO452).
‘Off Mode’ Default Time-
The default time for the ‘Off Mode’ is 60 minutes (e-STUDIO352)/90 minutes (e-STUDIO452).
e-STUDIO352/452 Copier/Printer + Fax model (Multifunction model)
‘Automatic Energy Save’-
‘Automatic Energy Save’-
The copier consumes less than 184.75 W (e-STUDIO352)/223.25 W (e-STUDIO452)
during Energy Save.
during Energy Save.
‘Automatic Energy Save’ Default Time-
The default time for the ‘Automatic Energy Save’ is 15 minutes.
‘Sleep Mode’
The copier consumes less than 80 W (e-STUDIO352)/95 W (e-STUDIO452) in the ‘Sleep Mode’.
‘Sleep Mode’ Default Time-
The default time for the ‘Sleep Mode’ is 60 minutes (e-STUDIO352)/90 minutes (e-STUDIO452).
Note1- The default setting for the ‘Sleep Mode’ and ‘Automatic Energy Save’ can be changed.
Note2- For Multifunction model, if the Fax or printer data is received in the sleep mode, the copier starts warming
Note2- For Multifunction model, if the Fax or printer data is received in the sleep mode, the copier starts warming
itself up and prints out the data when it becomes ready. Also, when the start button or the energy saver
button on the control panel is pressed, the copier starts warming itself up.
button on the control panel is pressed, the copier starts warming itself up.
Note3- If ‘Automatic Energy Save’ and ‘Sleep Mode’ have the same setting time, ‘Sleep Mode’ takes priority.
In accordance with EPA
E
NERGY
S
TAR program guidelines, Toshiba recommends the following recycled paper.
Great White MultiUse 20 paper
Great White MultiUse 24 paper
If you have any questions regarding the use of recycled paper or some recommended types of recycled paper,
please contact your authorized Toshiba dealer.
Great White MultiUse 24 paper
If you have any questions regarding the use of recycled paper or some recommended types of recycled paper,
please contact your authorized Toshiba dealer.
E
NERGY
S
TAR is a U.S. registered mark.