Motorola CPX8216T User Manual
5-2
Computer Group Literature Center Web Site
Transition/Bridge Modules
5
The CPX750HATM transition module includes:
❏ Industry-standard connectors for these interfaces:
–
Two asynchronous RJ-45 serial ports (DTE)
–
Two asynchronous/synchronous HD-26 serial ports, labeled
Serial 3 and Serial 4 on the face plate, which can be configured
for EIA-232-D, EIA-530, V.35, or X.21 interfaces (DCE or
DTE) through the installation of Motorola’s Serial Interface
Modules (SIMs)
Serial 3 and Serial 4 on the face plate, which can be configured
for EIA-232-D, EIA-530, V.35, or X.21 interfaces (DCE or
DTE) through the installation of Motorola’s Serial Interface
Modules (SIMs)
–
One parallel port (IEEE Standard 1284-I compliant)
–
One combination keyboard/mouse port
❏ Two 60-pin Serial Interface Module (SIM) connectors for
configuring the asynchronous/synchronous serial ports
❏ One 40-pin header for EIDE port
❏ One 34-pin header for floppy port
❏ Two 64-pin headers for PMCIO (1 ground pin provided with each
PMCIO signal)
shows the CPX750HATM transition module
for a
list of the front panel port connectors.
Serial Ports 3 and 4 Default Configuration
The CPX750HATM serial ports 3 and 4 are factory configured as follows:
❏ Serial Port 3: DTE (with SIMM 01-W3877B01A installed)
❏ Serial Port 4: DCE (with SIMM 01-W3876B01A installed)