Toshiba 205L User Manual
1 TROUBLESHOOTING FOR THE HARDWARE
52 Clearing a Staple Jam
12
Close the front cover of the finisher.
Test stapling starts automatically.
Test stapling is necessary to prevent void stapling. Note that the test stapling starts automatically when the two
requirements in step 11 are met with the front cover of the finisher closed. If the test stapling does not start,
make sure to check the two requirements again. Then open and again close the front cover of the finisher.
requirements in step 11 are met with the front cover of the finisher closed. If the test stapling does not start,
make sure to check the two requirements again. Then open and again close the front cover of the finisher.