Toshiba Studio 452 User Manual
44
1.BEFORE USING EQUIPMENT
4.Setting Copy Paper (Cont.)
1
Recommended paper
To make copies with a fine colour image, the following types of paper are recommended.
If you wish to use copy paper other than the recommended types, consult your service technician.
If you wish to use copy paper other than the recommended types, consult your service technician.
*1 Only Toshiba-recommended OHP film should be used. Using any other film may cause a malfunction.
Handling and storing paper
Pay attention to the following points:
•
•
Avoid using paper that is specially treated or previously printed on another machine, and also avoid
performing double copying on the same side of the paper, since this may cause a malfunction.
performing double copying on the same side of the paper, since this may cause a malfunction.
•
Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or rough paper; this
may cause paper misfeeds.
may cause paper misfeeds.
•
Paper should be wrapped in its wrapping and stored in a damp-free place.
•
To prevent paper from being folded or bent, store it evenly on a flat surface.
Paper type
Toshiba recommendations/Manufacturer
Mode
Plain paper
TGIS Paper/Neusiedler (80 g/m
2
)
PLAIN
Thick
Colour Copy/Neusiedler
(90 g/m
2
)
THICK1
(100 g/m
2
)
THICK1
(120 g/m
2
)
THICK2
(160 g/m
2
)
THICK2
(200 g/m
2
)
THICK3
Tracing paper
Tracing Paper/Ostrich International (75 g/m
2
only)
PLAIN
Sticker labels
3478/Zweckform-Avery
THICK3
OHP film
*1
PP2500/3M
OHP FILM