Toshiba Studio 452 User Manual
72
2.HOW TO MAKE COPIES
3.Bypass Copying (Cont.)
2
Bypass copying on standard size paper
Copying on A3, A4, B4 and B5 size paper
2
Place the original(s).
3
Press the button of the same size as the one of the paper you have set
on the tray.
on the tray.
• If the paper size is not specified here, copying may be slowed down.
1
Place some sheets of paper with their
copy side down on the bypass tray. Align
the side guides to the paper length while
holding A.
copy side down on the bypass tray. Align
the side guides to the paper length while
holding A.
• The message “Ready for bypass feeding” appears.
• Rear side of the side guides of the bypass tray has an indicator
• Rear side of the side guides of the bypass tray has an indicator
for paper height. The height of the sheets must not exceed this
indicator.
indicator.
• When you use more than one sheet, fan the sheets well before
setting them on the tray.
• Do not push the sheets into the entrance of the bypass feeder;
this may cause a paper jam.
When the paper size is larger, draw out the three-stage paper
holder. Raise B when you use A3 or a larger size of paper.
holder. Raise B when you use A3 or a larger size of paper.
A
B