Toshiba 2550c User Manual
Chapter 1 PREPARATIONS
16
Placing originals
Original glass
1
Raise the Original Cover or the Reversing
Automatic Document Feeder.
Automatic Document Feeder.
2
Place the original with its face down on the original
glass and align it against the left rear corner.
glass and align it against the left rear corner.
Lower the Original Cover or the Reversing
Automatic Document Feeder carefully.
e-STUDIO2051C/2551C: Press [ZOOM] and set the
size of the original.
&
Automatic Document Feeder carefully.
e-STUDIO2051C/2551C: Press [ZOOM] and set the
size of the original.
&
Copying Guide (PDF): “Chapter 3: BASIC COPY
MODES” -“Enlargement and Reduction Copying”
Reversing Automatic Document
Feeder
1
Place the originals face up on the original feeder
tray. Be sure that the document lamp (blue) lights
up, which is provided on the Reversing Automatic
Document Feeder.
tray. Be sure that the document lamp (blue) lights
up, which is provided on the Reversing Automatic
Document Feeder.
2
Align the side guides to the original length.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Breaking the glass could injure you.
Breaking the glass could injure you.
A4-R
(LT-R)
B4
(LD)
When placing mixed-size originals on the Reversing
Automatic Document Feeder, adjust its side guides to the
widest original, and then align the originals against the guide
on the front side.
Automatic Document Feeder, adjust its side guides to the
widest original, and then align the originals against the guide
on the front side.